Is trenchless sewer pipeline repair better than traditional repair methods?

Pipe bursting and damage is a common phenomenon. Whenever the pipes wear out or have been operating for a long time, they ought to get damaged. But when we think of traditional sewer repair, we can imagine huge excavations and disrupted areas. The repair work could take days and even weeks. 

But not anymore. With the advancements in plumbing technologies, trenchless sewer pipeline repairs present themselves as a groundbreaking solution. This method of sewer pipe involves less invasive methods and is environmentally friendly.

Let us understand more about this incredible sewer pipe repair technology in more detail.

How does this trenchless sewer repair work?

In traditional methods, a lot of digging work was required. But in the case of trenchless technology, this can be done with minimum excavation and the whole process follows simple steps:

• Pipe bursting

First of all, a new pipe is pulled through the existing damaged pipe and breaks the old and corroded pipe in the process. Through this method, entire sections of the sewer line can be replaced efficiently.

• cured-in-Place Pipe (CIPP)

In this step, a resin-soaked liner is inserted into the damaged pipe and inflated. It then cures and forms a new pipe within the old one. So, if you are looking to repair cracks, leaks, or root intrusions in your existing pipe, then this method will be suitable.

• Pipelining

It is somewhat similar to the CIPP type of trenchless sewer repair but is slightly different. In this method, a different material is used where pipe lining involves inserting a liner into a damaged pipe and securing it in place.

• Lateral line replacement

In this method of trenchless sewer repair, the damaged lateral line is accessed through a small entry point and then it is replaced with a new pipe using special plumbing equipment.

Is Trenchless Sewer Pipe Repair Beneficial?

Well, let us have a brief overview of how they can benefit users and plumbers to decide if they are beneficial or not.

Here are some notable advantages of employing a trenchless sewer repair:

1. Less disruption

As the name suggests, trenchless methods require minimal disturbance to the property. Therefore, plumbers don’t need to dig up your yard or driveway, and thus help with the preservation of beautiful landscapes and costly structures.

2. Cost-effective

Trenchless repairs are cost-effective as well. Of course, it requires a high initial investment, but it proves to be cost-effective in the long run because of low labor, equipment, and restoration requirements.

3. Environment friendly

As trenchless repairs require less of excavation, they reduce soil erosion and habitat disruption. They also help with the generation of very little construction waste.

4. Faster repair times

The repair time is usually faster as compared to traditional sewer pipe repairs. Thus it minimizes inconvenience and downtime.

5. Increases the lifespan of pipes

When the pipes are installed using trenchless methods, then they normally have a longer lifespan than the original pipes which helps to minimize future damage and inconveniences.

So, now coming back to the main question. Is trenchless sewer repair right for you?

By now you must have understood the benefits trenchless sewer repair offers and its working. Though it offers great advantages, it is not actually suitable for all swerve repair situations. There are several factors such as the amount of damage, type of pipe used, accessibility of line, etc., that decide if the trenchless method needs to be used or not. It might be difficult to decide it for yourself. Therefore, contact professional plumbers at Everest Mechanical.

Professional Trenchless Sewer Repair Service

Everest Mechanical has a team of experienced professional plumbers serving various parts of Colorado. We offer professional plumbing services in Longmont, Boulder, Denver, Fort Collins, Arvada, and nearby regions. We will thoroughly investigate the situation and recommend the right method to minimize your cost and inconvenience. Also, we offer warrantied service so that you can relax with peace of mind and focus on work that is more important to you. So, for all kinds of sewer pipe repair, and plumbing issues, contact Everest Mechanical now.

A Complete AC Service Checklist for Professional AC Service in Denver

 A properly running air conditioning system is the best thing that can happen in scorching summer heat, especially in places like Denver where the temperature can get really high. Therefore, the regular maintenance of AC becomes necessary that can help you keep cool in all conditions in your home. This regular maintenance ensures your AC system is running optimally, without working hard to increase your energy bills, as well as enhancing its overall lifespan. 

So, if you are looking to get your AC serviced, then there are certain points that must be ticked off. Here we bring you a complete checklist for professional AC services and see the important components and steps involved in a complete AC maintenance routine.

1. Initial inspection and assessment

The first thing a professional AC service company will do is, it will start with a thorough investigation and assessment of the AC system. It includes visual inspection such as checking the overall condition of the AC unit including its indoor and outdoor components. Then the professionals will perform operational assessments like turning on the AC system and see how it is working. They will assess how much time it takes to cool the space, what sort of noises are coming, if the airflow is proper or not, etc. The professional AC service technicians might also ask you to share the maintenance history and previous repairs if any to understand the AC unit properly.

2. Thermostat Calibration and tuning AC settings

The thermostat is one of the important elements of the AC system that control the entire system. So, the next point on the AC service checklist is calibrating thermostats for optimal reading. They will verify the thermostat’s readings and see if they provide accurate information. If required, they will check the thermostat settings and tune it for the season or user preference. They might also replace the thermostat batteries if they are old.

3. Electrical components and wires

Then next comes the electrical components. Faulty electrical components can lead to system failures. Therefore, checking of such components is another important point in the AC service and maintenance checklist. Professionals will inspect electrical connections, see if there is any wear, corrosion, or loose connections, and if they need replacement. They will also check the functioning of capacitors and contactors and replace them if necessary. Next, they will see if circuit breakers and fuses are in good condition or not and ensure they are suitable for the system’s requirements.

4. Refrigerant Level Check

Refrigerant helps in efficient cooling. If there is insufficient refrigerant level, then it can lead to poor cooling and may even damage the AC system. So, refrigerant level check is an important component of AC service and maintenance and it ensures the refrigerant level meets the manufacturer’s requirements. Professionals will also check for leaks using specialized equipment and repair them as required. Finally, they will recharge the system with the correct type and correct quantity of refrigerant if they are at a low level.

5. Coils cleaning and maintenance

Evaporators and condenser coils are needed for effective heat exchange. If they are dirty then it will lead to reduced efficiency and more energy consumption. Therefore, professionals must clean the indoor evaporator coils and remove dust, dirt, and other debris from them. They also need to clean the outdoor condenser coils to ensure proper heat dissipation. If they find any bent coil fins then they need to straighten them for optimal airflow.

6. Air Filter Cleaning and replacement

The role of aid filters cannot be ignored in providing clean and pure air inside the home. So, an AC service company in Denver will look for all kinds of dust, debris, pollens, and other particles in the air filters and clean them with their specialized tools. This will unclog the filter and maintain better airflow without straining the AC system. If required, they may also suggest replacing the air filters which is required to be done every 3-12 months depending upon the type of air filter you are using.

7. Blowers and fans

Many AC service companies often skip this part, but you must ask them to thoroughly check the blower and fans to ensure they are working efficiently for the best airflow. This step includes checking the blower motor and lubricating its bearings for free movement of the motor. They should also clean the fan blades and remove dirt buildup. Checking the fan belt for signs of wear and tear is recommended and they should replace it if it looks damaged.

8. Drainage system check

Drainage is another important element of an efficient air conditioning system. It helps to remove condensation from the AC unit. If the drain is clogged then it will lead to water damage and mold growth. Therefore, professional HVAC service must thoroughly inspect the drain line, see if there are any clogs, and clean it as required. They also need to check the drain pan for rust or any other kind of damage. Condensate pipe should also be properly cleaned to ensure it is functioning properly.

9. Ductwork inspection and cleaning

This step involves checking for any leakage in the ductwork and sealing them as necessary. It also includes checking of insulation around the ducts and adding more of it if it is insufficient. They must also clean the ducts and remove dust and allergens. Clean ductwork helps with the efficient distribution of cooled air throughout your home and cleaning and addressing leaks and blockages enhances its efficiency.

10. System performance and testing

So, once all the checks and repairs are done, it is time to test the final performance of your AC system and fine-tune it for the best cooling. In this step, professional AC service technicians will measure the temperature drop across the evaporator coil and ensure it is within the recommended range. They will also measure the airflow and see the system’s cycling to ensure it turns on and off correctly.

Everest Mechanical: For all your HVAC needs

So now that you are aware of the various steps required to complete the entire AC maintenance, you must choose a reliable and trusted AC service company for servicing the air conditioner in your home.

We are proud to present ourselves as the most reliable and affordable HVAC service company in Colorado offering top-class HVAC repair and maintenance service across Colorado in Denver, Fort Collins, Arvada, Boulder, Estes Park, and nearby regions.

We have a team of highly experienced, trained, and certified technicians who ensure they address all sorts of problems in your HVAC system. So, whether you are looking for a minor repair or heavy installation, we will do it all.

Contact Everest Mechanical now to get a warrantied service offering you complete peace of mind.